Low Flow electromagnetic flow meter|Mini Inductive magnetic flow meter

Product Description

Fuction and advantage：

♦LCD display: cumulative flow, instantaneous flow and flow rate. 100%. Alarm information, etc
♦Compact design, low-cost Low flow electromagnetic flowmeter;
♦Suitable for liquids with conductivity above 10us / cm;
♦Easy to install and do not need to be maintained;
♦The minimum flow can be as low as 5L / h;
♦Provide an optional integrated temperature sensor to display the medium temperature;
♦Counter with two -way measurement and independent counting;
♦Intelligent air traffic control detection and judgment;
♦Peek liners and optional EPDM seals are available for hygienic measurements;
♦No moving parts and no mechanical wear;
♦Thread or Tri-clamp connection, easy to install and disassemble;
♦Easy to operate and provide various outputs;
♦DC24V power supply, optional with or without display screen.

Technical Specification

Nominal diameter:DN3~DN20

Accuracy: ±0.2%/±0.3%/±0.5% （optional）
Measurement range: 0.01m/s~10m/s customized
Conductivity of medium: more than 10μS/cm
Temperature measured can be added（optional）
Nominal pressure: 1.6MPa/1.0MPa
Protection grade: IP65/IP67 （optional）
Electrode material: SS316L, HC, Ti, Ta
Lining material: PEEK
Connection:thread（SS304/SS316L/PVDF）,flang，Tri-clamp
Process Temperature：-20℃~90℃
Ambient temperature: -10℃~60℃
Body materials:aluminium alloy or stainless steel
Power supply:24VDC
Signal output: MODBUS RTU,Analog 4mA-20mA, 0Hz~ 5 KHz frequency
Communication: RS485, RS232, MODBUS RTU, HART, PROFIBUS-DP (OPTIONAL)
Flow range for different szie：