TUF-2000B|wall mounted ultrasonic flow meter

Product Description

Advantages:

♦Clamp-On Design:No need to cut the pipe or stop the flow for installation. This minimizes downtime and maintenance costs.

♦No Pressure Drop:The meter does not come into contact with the fluid, there is no additional resistance or pressure drop.
♦ Wide Range of Applications: Suitable for measuring a variety of liquids, including clean, dirty, or corrosive fluids.
♦Applicable to Various Pipe Materials: such as metal, plastic, or even lined pipes.
♦Measurement accuracy 1%.
♦Convertor protection class lP67,transducer protection class lP68
♦Wide measurement range, pipe size from DN25 to DN 6000
♦Connect the temperature transducer can finish the heat/energy measurement.
♦No Fluid Contamination: Since the meter does not contact the fluid, there is no risk of contamination.
♦Optional SD card memory （Convenience for long-term and large datastorage.Available to do the dataprocessing like tabulation, statistical, dataanalysis, printing reports and productionflow curve by using data analysis software.）

Types of transducer

Flow transducer	Model	measuring range	Temperature
Clamp on	TS-2(small)	DN25-DN100	-30°C~90°C
	TM-1(medium)	DN50-DN700
	TL-1(large)	DN300-DN6000
High temp Clamp on	TS-2-HT(small)	DN25-DN100	-30°C~160°C
	TM-1-HT(medium)	DN50-DN700
	TL-1-HT(large)	DN300-DN6000

Technical Specification

	Wall-mounted ultrasonic flowmeter	Wall-mounted ultrasonic energy meter
Accuracy	±1%	±2%
Tube diameter:	DN25-DN6000
Flow rate	0-±7m/s
Turbidity	10000ppm, and the bubble content is small
Medium Tep:	-30-160°C
Applicable pipes	Steel, stainless steel, copper, PVC, aluminum, fiberglass and other pipes. Lining is allowed.
Signal Output Signal input	1 way OCT Output (pulse width 6-1000ms, default 200ms)	1 way 4~20mA output
		1 way OCT output
		1 way relay output
		3 way 4~20mA input
		2 way temperature messure
Data interface	RS232	RS485
Communication protocol	MODBUS,M-BUS,HART,ETC
Display	LCD display
Keyboard	16+2 Touch keyboard
Data record	Built in 32MB memory	Thermal printer External SD card
Power supply	Dc 8-36V or Ac 85-264V (optional)